Manual - Pentair Pool Products Nocchi R2T Use And Maintenance Manual

1.5.1 Personnel qualifications
Qualification and protection limits established for operators
OPERATOR QUALIFICATION
Transportation Familiarity and
knowledge of
chapters:
- "General
information "
- "Description"
- "Installation"
Installation Qualification
compliant with
regulations and
installation status,
knowledge of
installation status
and familiarity with
chapters:
- "General
information "
- "Description"
- "Installation""
Operation Familiarity and
knowledge of
chapters:
- "General
information "
- "Description"
- "Installation"
Maintenance Qualification
acknowledged by
PENTAIR WATER
ITALY. Familiarity
and knowledge of
chapters:
- "General
information "
- "Description"
- "Maintenance"
Demolition Familiarity and
knowledge of
chapters:
- "General
information "
- "Description"
- "Installation "
Danger The machine operates in safety conditions
if it is used by qualified personnel in
accordance
information contained in this manual and
present on board.
All the operations referred to in this manual
should be performed by qualified personnel
equipped
described in this manual
PENTAIR WATER ITALY shall not be liable
for accidents if the machine is used from
NOTE
non qualified or unauthorised personnel
and originating from the failure to follow
the instructions contained in this manual
and present on the machine board
RECOMMENDED
INDIVIDUAL
PROTECTION
MEANS
Protective shoes
and gloves
Protective shoes
and gloves
Protective shoes
and gloves and
protective
temperature against
high temperatures
Protective shoes
and gloves
Protective shoes
and gloves
with the instructions
with the protection
1.5.2 Special measures
The use of personnel with a qualification differing from the one
indicated can endanger the safety of people and/or damage
the property.
1.6 Conventions
1.6.1 Terminological conventions
The following conventions have been adopted throughout the

manual

- Machine
- Authorised technician : person authorised by PENTAIR
- Specialised technician : person authorised to perform even
1.6.2 Typesetting conventions
Danger
Warning
NOTE
1.7 Recommended use
1.7.1 Recommended use
The machine has been designed, manufactured and protected
to allow the transfer, circulation and increase of pressure of the
following types of liquid:
- Water with a temperature ranging from -20 °C to 130 °C (for
temperatures below 0 °C, it is necessary to add an
appropriate amount of anti-frost)
- Cooling fluids that do not contain mineral oils
- Neutral, non explosive and non aggressive fluids free from
and
solid particles and suspended fibres
The machine has been designed, manufactured and protected
to guarantee a flow rate of fluid that changes according to the
desired head (see "Product specifications").
means
1.7.2 Recommended installation
The machine has been designed, manufactured and protected
to be installed in the following environments:
- Indoors
- Outdoors with protection against atmospheric agents
The machine has been designed, manufactured and protected
to be used in the following atmospheric conditions:
- Temperature range: -15 °C and +40 °C
- Relative humidity range: from 30% to 90%
: electropumps specified in section
"Product specifications"
WATER ITALY to perform even
the operations not specifically
indicated in this manual
the operations not specifically
indicated in this manual after
being authorised by PENTAIR
WATER ITALY
Danger signs indicate procedures that have
to be thoroughly followed to avoid causing
physical injuries to operators
Warning signs indicate procedures that
have to be thoroughly followed to avoid
damaging the machine or other equipment
connected to it
Notes contain important information that
are highlighted outside
connected to it
the text and