Universal Hmi Panel; Labeling Strips; Labeling The Labeling Strips - Bosch Rexroth IndraControl VDP 80.1 Series Manual

DOK-SUPPL*-VDP*80.1***-PR03-EN-P
Rexroth IndraControl VDP 80.1 Machine Operator Panel Operator Display
7

Universal HMI Panel

7.1

Labeling Strips

7.2

Labeling the Labeling Strips

There are 4 labeling strips that can be changed by the user. The labeling strips
are inserted at the back of the Universal panel
Fig.7-1: Inserting direction of strip
Fig.7-2: Inserting direction of strip from the back
The Universal panel is equipped with labeled labeling strips by default. These
labeling strips are printed with standard symbols of the milling operator panel.
● When changing the labeling strip, please note that the 32 operator panel
keys can be changed by the user. 4 operator panel keys are already as‐
signed on the operator panel (Manual, MDI, Auto and Reset)
● Bosch Rexroth provides a printer template to allow the user to print his
own labeling strips. All currently available symbols are provided as bit‐
maps. This template can be downloaded on the Bosch Rexroth webpage.
● The sheet type used to print the labeling strips is specified in the template
or the documentation
The template or the documentation contains information about the manufac‐
turer and the order number of the sheets.
With each equipped Universal operator panel, 2 blank sheets are provided to
print the labeling strips. The sheet format is DIN A4.
A standard laser printer is required to print the sheets.
Bosch Rexroth AG 49/61
Universal HMI Panel