Install The Software - Logitech Cordless Presenter Quick Start Manual

Hide thumbs Also See for Cordless Presenter:
Table of Contents

Advertisement

Battery Warning!
When battery power is low for the presentation device,
the Battery Status LED turns red and blinks slowly.
In addition, the cursor on your screen may not move,
it may move erratically when you move the presentation
device, or the MouseWare
®
box in Windows
98, Windows
®
Windows
Me, and Windows
change the batteries. It is recommended that you
promptly change your batteries to avoid any battery
leakage. (See "Battery Status LED" and "Battery Life" in
this manual for more information.)
If your batteries leak, use normal precaution and follow
the battery manufacturer's recommendations.
When replacing batteries, use alkalines. You may use
other battery types, but do not mix them with alkaline
batteries.
Note that the battery level indicator in the Mouse
Properties is calibrated for alkaline batteries only,
and will not give an accurate indication of battery life
for batteries other than alkalines.
Discard all used batteries according to the battery
manufacturer's instructions. Exercise care when handling
batteries.
4
English
®
software may display a dialog
®
®
98 SE, Windows
2000,
®
XP suggesting that you
When batteries are misused, they may explode or leak,
causing burns and personal injury. Do not open a battery
or mutilate, dispose of in a fire, expose to heat above
130° F (54° C), immerse in water, install improperly,
or recharge.
Conducting materials, such as rings, bracelets, and keys,
can short out a battery causing it to overheat and
possibly leak or explode. When you are not using
your presentation device for long periods of time,
remove the batteries and store them in a dry place
at normal room temperature.

Install the Software

To use all the features of the Logitech
Cordless Presenter
, make sure to install the software.
1. With your computer running,
insert the software CD into the CD-ROM drive
of the computer.
2. Follow the on-screen instructions to finish
installing the software.
3. Use the software wizard to setup the
presentation device.
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents