Camera Module - HP Elite x2 G4 Tablet Maintenance And Service Manual

Camera module

Table 6-8 Camera modules and cables descriptions and part numbers
Description
IR camera (2 MP)
HD camera (8 MP)
Microphone cable
IR LED cable
Before removing the camera module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the following components:
a. Display panel (see
b. Battery (see
Remove the camera:
IMPORTANT:
1. Disconnect the four cables from the ZIF connectors on the camera module (1).
2. Using a Phillips #0 screwdriver, remove the two Phillips M1.6 × 2.4 screws (2) that secure the module to
the computer, and then remove the module from the computer (3).
3. If you need to remove the IR LED cable or the microphone cable from the camera module:
a. IR LED cable: Pull the cable straight up and off the camera module (1).
50 Chapter 6 Removal and replacement procedures for authorized service provider parts
Display panel on page
Battery on page
Use care to prevent damaging the zero-insertion force (ZIF) connector and ribbon cable.
(Preparation for disassembly on page
38)
42)
Spare part number
L67412-001
L67411-001
L67421-001
L67424-001
35).