Table of Contents
Advertisement
WINDING/INSTALLING THE BOBBIN
h
Set the bobbin winding switch to the left, until it clicks
into place.
1 Bobbin winding switch
The bobbin winding window appears.
i
Press
.
Bobbin winding starts. The bobbin stops rotating
when bobbin winding is completed. The bobbin
winding switch will automatically return to its
original position.
changes to
winding.
You can change the winding speed by pressing
(to decrease) or
winding window.
Note
• The sound of winding the bobbin with stiff thread,
such as nylon thread for quilting, may be different
from the one produced when winding normal
thread; however, this is not a sign of a malfunction.
• When winding transparent nylon thread on the
bobbin, stop bobbin winding when the bobbin is
1/2 to 2/3 full. If the bobbin was fully wound with
transparent nylon thread, it may not be wound
neatly, or sewing performance may suffer. In
addition, extreme pressure may be applied to the
bobbin, it may not be possible to remove the
bobbin from the bobbin winder shaft, or the
bobbin may break.
Memo
• Press
window. Then, you can perform other operations,
such as selecting a stitch or adjusting the thread
tension, while the bobbin is being wound.
• Press
display the bobbin winding window again.
38
a
while the bobbin is
(to increase) in the bobbin
to minimize the bobbin winding
(in top right of the LCD screen) to
j
After bobbin winding is finished, cut the thread with
scissors and remove the bobbin.
■ Using the Spool Pin
You can use the main spool pin to wind the bobbin before
sewing. You cannot use this spool pin to wind the bobbin
while sewing.
a
Turn the main power to ON and open the top cover.
b
Align the groove in the bobbin with the spring on the
bobbin winder shaft, and set the bobbin on the shaft.
a
1 Groove in the bobbin
2 Spring on the bobbin winder shaft
c
Remove the spool cap and place the spool of thread for
the bobbin onto the spool pin.
Slide the spool onto the spool pin so that the thread
unwinds to the front from the bottom.
c
1 Spool pin
2 Spool cap
3 Spool of thread
4 Spool felt
a
Advertisement
Table of Contents
