Embroidering A Pattern; Embroidering Attractive Finishes - Brother 882-W70 Operation Manual

Embroidery and sewing machine
Hide thumbs Also See for 882-W70:
Table of Contents

Advertisement

EMBROIDERING A PATTERN

b
From
, press the key for the position that you
want to check.
1 Selected position
 The carriage will move to the selected position on
the pattern.
Memo
• To see the entire embroidering area, press
The carriage moves and shows the embroidery
area.
CAUTION
• Make sure the needle is up when the carriage
is moving. If the needle is down, it could break
and result in injury.
c
Press
.
134
EMBROIDERING A PATTERN

Embroidering Attractive Finishes

Many factors are involved in achieving a beautiful
embroidery result. Using the appropriate stabilizer
(page 127) and hooping the fabric in the frame
(page 128) are two important factors mentioned earlier.
Another important point is the appropriateness of the
needle and thread being used. See the explanation of
threads below. Included with this machine are two
bobbin cases. Follow the explanation below.
1
Thread
Bobbin thread Use embroidery bobbin thread
Memo
• If you use threads other than those listed above,
the embroidery may not embroider out correctly.
Bobbin case (recommended for sewing and for
.
embroidering with included 60 weight bobbin thread)
1 Standard bobbin case (green marking on the screw)
Standard bobbin case originally installed in the
machine has a green marking on the screw. We
recommend using the included embroidery bobbin
thread with this bobbin case. Do not adjust the tension
screw on this bobbin case with the green marked
screw.
Bobbin case (for prewound or other embroidery
bobbin threads)
1 Bobbin case (no color on the screw)
The bobbin case with no color on the screw is set with
tighter tension for embroidery with different weights of
bobbin threads and a variety of embroidery techniques.
This bobbin case is identified with a dark colored mark
on the inside of the bobbin cavity. The tension screw on
this case can be adjusted if necessary. For details, refer
to "Adjusting the Alternate Bobbin Case (with No Color
on the Screw)" on page 145.
Upper thread Use embroidery thread intended for
use with this machine.
intended for use with this machine.

Advertisement

Table of Contents
loading

Table of Contents