Table of Contents
Advertisement
Section 3 - Configuration
Destination
If Ether Type has been set to IPv4 or IPv6, specify a destination
IP/IPv6
IP address to which the rule will be applied. (Optional)
Address:
Destination
If Port has been set to TCP or UDP and Ether Type has been set
Port:
to IPv4 or IPv6, specify the destination port to which the rule
will apply. (Optional)
VLAN ID:
Enter teh VLAN ID to which the rule will apply. (Optional)
VLAN Priority:
Enter the VLAN priority to which the rule will apply. (Optional)
VLAN
Enter the VLAN encapsulation to which the rule will apply.
Encapsulation:
(Optional)
FWDN:
Enter the fully qualified domain name (FWDN) to which the rule
will be applied. (Optional)
ALG:
Enter the application layer gateway (ALG) to which the rule will
apply. (Optional)
IP Option:
Select an IP Option from the dropdown list to which the rule will
apply. (Optional)
DSCP:
Select a differentiated services code point from the dropdown
menu to which the rule will apply. (Optional)
Source MAC
Enter a source MAC address to which the rule will apply.
Address:
(Optional)
Destination
Enter a destination MAC address to which the rule will apply.
MAC Address:
(Optional)
Click Apply to save your settings, Cancel to clear settings, or Back to return to the
previous page.
D-Link DWR-961 User Manual
79
Advertisement
Table of Contents
