Stanton T.62 User Manual page 3

ASSEMBLY
Thank you for purchasing the T.92 USB turntable from Stanton. The T.92 USB has been designed to allow easy transfer of vinyl records to CD or Mp3. The
T.92 USB is built upon Stanton's heritage of designing audiophile products for the most discriminating listener. Before assembling the T.92 USB please
check to make sure the following items are included with the main unit in the carton.
Cakewalk Pyro Installation CD
AC cord
RCA cable
USB cable
45 rpm adaptor
Counter weight
After confirming that all of the above parts are included in the box, its time to assemble the turntable.
1) Remove the platter from its protective wrapping and place on the spindle of the main unit.
2) Remove the slipmat from its protective wrapping and place on the platter.
3) Place the counter-weight on the back of the tonearm assembly.
CONNECTIONS
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the phono/line switch at the rear of the turntable to
Line.
Visit www.stantondj.com for downloadable updates, videos, and news about this product.
Set the phono/line switch to "PH".
Set the phono/line switch to "LINE".
T. 9 2 U S B
Platter
Slipmat
Cloth dust cover
Instruction manual
Stanton 500.V3 Cartridge pre-mounted on headshell
2
T. 9 2 U S B