FULL MANUAL OPERATING INSTRUCTIONS DIRECT DRIVE TURNTABLE T.6O WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these Instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these Instructions – The safety and operating instructions should be retained for future reference. 3. Heed all Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4.
Page 3
IMPORTANT SAFETY INSTRUCTIONS 21. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
The average stylus pressure of the cartridge body is 1.5-2 g. If you use a non-Stanton cartridge, please follow that manufacturer’ s instructions. 8. Install the cloth dust cover to the main unit.
Clean the stylus periodically with a soft brush to prevent the accumulation of dust. SPECIFICATIONS APPLICATION: This specification applies to the direct drive turntable unit T.60 STANDARD TEST CONDITION: Ambient Temperature Relative Humidity NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
SPECIFICATIONS TONEARM SECTION: Type Effective Arm Length Tracking Force Adjustment Range Applicable Cartridge Weight CARTRIDGE SECTION: Channel Separation Channel Balance Needle Pressure range GENERAL SECTION: Power Supply Power Consumption Dimensions Weight Static balanced straight shaped tonearm with cardan’ s suspension 191mm 0~4g 6~10g...
Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.