Stanton RM-406 Owner's Manual page 18

Line Inputs.................................................................................7 x 2 (RCA) , -10 dBV / >10 kOhm
Phono / CD Inputs...................................2 x 2 (RCA), -46 dBV / -10 dBV / 47 kOhm / >10 kOhm
Phono..............................................................................1 x 2 (RCA), -46 dBV (Phono) / 47 kOhm
Phono / Mic Input..................................1 x 2 (RCA), -46 dBV (Phono) 1 x (_ inch)–46 dBV (Mic)
Mic Input..................................................................................1 (XLR or 1/4") -46 dBV / 2.4 kOhm
Master Outputs............................................................2 (XLR) balanced/ 1 x 2 (RCA) unbalanced,
Zone Outputs................................................................2 (1/4") balanced /1 x 2 (RCA) unbalanced
Booth Outputs.............................................................................1 x 2 (RCA) unbalanced /-10 dBV
Sub Outputs.............................................................................................1 (XLR) balanced/ -2 dBu
Record Output............................................................................1 x 2 (RCA) unbalanced / -10 dBV
Headphone Output...........................................1(1/4 inch), 1 (1/8 inch) greater than 32 Ohm load
Frequency Response.............................................................................20 Hz to 20 kHz +/- 1.5 dB
EQ Mic...........................................................................................3 band +10 dB (Baxandall Type)
Channel.......................................................................3 band +9 dB/kill (18 dB/octave DJ EQ)
Noise Floor
Line in to Unbalanced Output...........................................................................................< -92 dBV
Line In to Balanced Output................................................................................................< -88 dBu
Crosstalk*
Line to Phono Line to Line....................................................................................< -88 dB at 1 kHz
Phono to Line........................................................................................................< -88 dB at 1 kHz
Fader Kill (Channel and Crossfader)....................................................................< -90 dB at 1 kHz
Max Output Level:
(Unity Gain- Line Input)...................................................................................+18 dBV Unbalanced
S/N Ratio Line
(Ref to Max. Level)DynamicRange....................................................................................> 110 dB
T.H.D+N...............................................................................................................< 0.015% at 1 kHz
Sub Woofer Output.......................................................................12 dB/octave Linkwitz-Riley Type
Dimensions (LxWxD).........18.9 in. x 8.7 in. x 5.3 in. (48 cm. x 22 cm. x 13.3 cm.) 5U rack
spaces
* Input without signal terminated with dummy plug.
REPLACEMENT PARTS
Faders:
Crossfader: CF404
Power Supply:
110v PS16US (North & Central America and parts of South America)
220v PS16EU (Europe, Parts of Asia and South America and Rest of World)
240v PS16UK (U.K.)
To replace the cross or channel faders, follow step 1 of the cleaning instructions. Replacement
parts are available from Stanton or your local Stanton dealer.
Technical Specifications
1 (1/8" stereo mini-jack), 10 dBV / >10kOhm
-2 dBu balanced / -10 dBV unbalanced
-2 dBu balanced/ -10 dBV unbalanced
+24 dBu Balanced Outputs
80 Hz to 320 Hz