Section I: Power - Stanton RM-406 Owner's Manual

RM.406 Rear Panel (FUNCTIONS)
K
I
Section I:
Section J:
Section K:
Section L:
Section M:
Section N:
Section O:
Section P:
Section Q:
Section R:

Section I: Power

I. Power Switch & Connection: This is the ON / OFF power switch for the
entire mixer. Only use the supplied adaptor (18v AC 1A) or one authorized
by a Stanton dealer or our service department (make sure the AC cable is
properly secured by the screw connection.) In order to protect the RM.406
and any equipment connected to it, make sure the unit is off before connect-
ing the power or making any other connections. In addition, make sure all
volumes are turned all the way down prior to following the proper power on/off
sequence. When turning on your system, turn the RM.406 on first, followed
by the rest of your equipment. When turning your system off, turn off the
RM.406 last.
L
J M
Power
Master Output
FX (Send & Return)
Zone Output
Sub Output
RCA Outputs
Channel 4 Inputs
Channel 3 Inputs
Channel 2 Inputs
Channel 1 Inputs
N O P Q R