Controls And Functions - Stanton C.502 User Manual

CONTROLS AND FUNCTIONS

1. AUTO CUE
This will indicate if the Auto Cue is on or off. Press
and hold the SGL/CTN for 1 sec. to turn the Auto Cue
function on and off.
2.TRACK INDICATOR
This 3-digit indicator displays the current track. The
number displayed in the track indicator is a direct
reference to a track being selected or a track in play,
pause, or cue mode.
3.FOLDER/TRACK INDICATOR
This indicator shows you if you are looking at the
track number or the folder number.
4.PLAY / PAUSE INDICATOR
When the unit is in play mode the "PLAY"indicator
will glow, when the drive is in pause mode the "PAUSE"
indicator will glow.
5.CUE INDICATOR
This indicator will glow when the unit is in CUE mode
and will flash every time a new CUE POINT is set.
6.SINGLE INDICATOR
This indicates that the CD drive is in single play mode.
The track will play once and return to CUE mode. If
the single indicator is not on, the unit is in continuous
mode and the drive will play all the remaining tracks
on the disc until you stop it or power is interrupted.
7.MP3 INDICATOR
This will indicate that a Mp3 disc is loaded in the drive.
8.TIME BAR INDICATOR
This bar gives a visual approximation of a track's
or disc's remaining time. This bar will begin to flash
when a CD is ending or a track if the unit is in"
SINGLE" mode.
7 7
9.LOOP INDICATOR
Appears when the CD is repeating a particular area
with the music on the CD.
10.RELOOP INDICATOR
Appears when the CD has a loop set previously
and can go back loop again.
11.PITCH INDICATOR
Indicator will light up when the Pitch is activated.
12.PITCH METER
Shows the percentage change in pitch of the song.
The meter will display the pitch percentage applied
by the PITCH SLIDER.
13.TIME DISPLAY
This displays the Minutes, Seconds, and Frames.
The meter will display either the elapsed time, or
remaining time of a track.
14.CHARACTER DISPLAY
This will display the name of the file, artist, and title
when a Mp3 disc is loaded.
15.TOTAL REMAIN INDICATOR
When TOTAL and REMAIN are visible, this indicates
that the Time Display is showing total remaining
disc time.
16.REMAIN INDICATOR
When the REMAIN indicator is visible this indicates
that the Time Display is showing remaining track
time.
17.ELAPSED INDICATOR
It is for showing time as it is taking place.
7