Table of Contents
Advertisement
FACTORY SETTINGS
To return to factory settings...
• Power off the unit
• Press and hold the CLEAR button as you power up the unit
• The display will read clearALL, release the CLEAR button
WARNING: Restoring factory settings will delete cue point memory.
FADER START
By connecting the CD player to a mixing board that has the fader start fea-
ture, the crossfader will engage playback or cue mode depending on its
location. If the CD player is connected to the left side of the crossfader,
playback will start once the fader is moved from the left most position
towards the right. The CD player will re-cue itself when the crossfader is
brought back to the left most position. Two CD players can be hooked up
in this fashion to work on both sides of the crossfader.
SPECIFICATIONS
1. APPLICATION
Model C.313
2. POWER SOURCE
US: 120V, 60Hz, AC 15W
EU: 230V, 50Hz, AC 15W
JP: 100V, 50/60Hz, AC 15W
UK/AUS: 240V, 50Hz, AC 15W
3. DIMENSIONS
318 (W)x 358 (D)x 109.5 (H) mm
4. WEIGHT
4.3 Kgs
5. AUDIO CHARACTERISTICS
(1) Frequency Response
(2) Output Level
(3) THD+N
(4) S/N Ratio (ref: fullscale)
6. SEARCHING TIME (TEST DISC: TCD-792)
ITEM
(1)
Short access time 2sec
(2)
Long access time
7. PLAYABILITY
ITEM
(1)
Interruption
(2)
Black dot
(3)
Finger prints
(4)
Eccentricity
(5)
Vertical deviation
20Hz to 20kHz +0/-1.5 dB
+6dBV
<0.015% @ 1kHz
88dB
TYPICAL
LIMITS
4sec
4sec
6sec
TYPICAL
LIMIT
1mm
0.7mm
1mm
0.6mm
75um
65um
140um
140um
1mm
0.5mm
RELAY PLAY USING TWO PLAYERS
When both CD players are connected to each other via their FADER
START / RELAY jacks, the players can work in unison by playing tracks
one after another from both units.
• Set both players to single play mode (the SINGLE indicator will be illu-
minated in the LCD displays).
• Begin playback on the first player.
• When the first track ends, playback will automatically start on the sec-
ond player and the first player will automatically enter standby mode.
• When the track on the second player ends, the first player will play the
next track. The players will continue to perform continuous relay play
until stopped or until the last track is played.
• You can set a cue point on the standby player to jump directly to that
point.
SLEEP
The C.313 will automatically go into sleep mode after 15 minutes of inac-
tivity. Press either the Play or Cue button to wake it up.
CONDITION
Play next track
Track 1 ->Track 20
Track 20 ->Track 1
CONDITION
TCD-725
TCD-725
TCD-725
TCD-712 W/O TRACK JUMP
TCD-731R
9
Advertisement
Table of Contents
