Fisher & Paykel DD60DAW9 Operating Instructions Manual page 5

• An alert code will show in the display
• The sanitize indicator will not be lit.
• Check if the water supply has been turned off or
the wash program interrupted.
• Press
once to stop the beeping and then again to clear
the alert code, then run the sanitize cycle again.
See also section 'How to attend to a fault'.
DD*D and DD*I Models:
If sanitization has been successful:
• The wash will finish as normal.
If sanitization has not been successful:
• An alert will sound
• When the drawer is opened the sanitize indicator will flash.
• Check if the water supply has been turned off or the wash program interrupted.
• Press and hold
once to stop the beeping and a second time to clear the flashing alert code.
• Reset sanitize and then run the cycle again.
• See also section 'How to attend to a fault
https://producthelp.fisherpaykel.com/nz/Clean/DishDrawer%E2%84%A2/Double/DD60DAW9/User_Guide_DD60DAW9/03_O...
Updated: Mon, 11 Nov 2019 03:23:07 GMT
Powered by
5