How Much Rinse Aid To Use - Fisher & Paykel DD60DAW9 Operating Instructions Manual

Any accidental spillages of rinse aid must be
wiped up. If not wiped up, spilt rinse aid will
cause excessive foaming, which may result
in a service call that will not be covered by
warranty.
3. Refit the plug, then turn it clockwise back to its original
position.
Make sure that the plug is closed tight, with
its hand grip in a vertical position.

How Much Rinse Aid to Use

You may need to adjust the amount of rinse aid dispensed in each
wash to suit your water conditions. The lowest setting is '0 (off)', the
highest is '5'. See the 'Preference options' for instructions on how to
change the rinse aid setting.
• If there is excessive foam at the end of the wash, reduce the
setting.
• If dishes are wet or streaky after drying, increase the setting.
• If you live in a hard water area and you have no water
softener installed in your water supply or built into your
dishwasher, we recommend adjusting the rinse aid setting to
5.
https://producthelp.fisherpaykel.com/nz/Clean/DishDrawer%E2%84%A2/Double/DD60DAW9/User_Guide_DD60DAW9/03_O...
Remove the plug
Pour rinse aid into the circular opening
Updated: Mon, 11 Nov 2019 03:23:07 GMT
Powered by
25