How To Fill The Salt Reservoir - Fisher & Paykel DD60DAW9 Operating Instructions Manual

250 -
2
350
350 -
3
450
450 -
4
550
550 -
5
625
• If your water hardness is above 625ppm/36 gpg, we highly recommend you completely fill the
• You may hear some unusual noises when the water softener is in operation, this is normal.

How to Fill the Salt Reservoir

1. Open the drawer.
2. Unscrew the salt reservoir cap by turning anticlockwise.
3. Place the salt into the salt container and pour the contents into the salt reservoir. The salt reservoir can hold up
to approximately 1 lb/0.5 kg of salt.
4. Fit the cap clockwise, tightly, back into its original position.
5. If you do not wash your dishes immediately after filling the salt reservoir, run a Rinse program to remove any
salt water or spilt granules.
https://producthelp.fisherpaykel.com/nz/Clean/DishDrawer%E2%84%A2/Double/DD60DAW9/User_Guide_DD60DAW9/03_O...
14 -
14 - 20
19.6
19.6 -
20 - 26
25.2
25.2 -
26 - 32
30.8
30.8 -
32 - 36
35
detergent dispenser for all programs except Rinse, and the rinse aid setting should be at 5. If
your water hardness is above 625ppm/36 gpg, the wash performance of your dishwasher will
decline.
17.5 - 2.5 -
25 - 35
24.5
24.5 - 3.5 -
35 - 45
31.5
31.5 - 4.5 -
45 - 55
38.5
38.5 - 5.5 -
55 - 62
43.8
3.5
4.5
5.5
6.2
Updated: Mon, 11 Nov 2019 03:23:07 GMT
Powered by
27