Battery Removal - Remington NE3850 Quick Start Manual

TROUBLESHOOTING
• The trimmer is not running but has battery power left:
• If the trimmer is not running it may need cleaning; look for and remove any dried
debris from the cutting blades and then press the Active BladeClean system button
whilst rinsing the trimmer under running water.
AFTER EACH USE
• Rinse the accumulated hair from the cutters as noted above. Ensure all debris is
removed from between the blades and then press the Active BladeClean system
button and shake off excess water.

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• Rotate the battery compartment cap approximately ¼ turn anti-clockwise then pull
off.
• Remove the battery from the battery compartment.
• Place the cap back on the unit opposite to how it came off and rotate clockwise
until the cap snaps into place.
• The battery is to be disposed of safely.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.