Jenn-Air JF36NXFXDE Installation Manual page 25

Bottom mount built-in refrigerator
Hide thumbs Also See for JF36NXFXDE:
Table of Contents

Advertisement

Available languages

Available languages

Drawer Panel
IMPORTANT: This step is complete on JennAir Stainless Steel
Panel Kits.
1. Using the Phillips-head flat screws (provided with refrigerator),
fasten a drawer panel bracket to each side of the drawer
panel, as shown.
A
A. Drawer panel
B. Drawer panel mounting bracket
Top Grille Panel
IMPORTANT: This step is complete on JennAir Stainless Steel
Panel Kits.
1. Using the slotted hex-head screws (provided with refrigerator),
attach a mounting bracket to each side of the top grille panel.
IMPORTANT: See the "Parts Provided" section to select the
brackets designated for your installation.
■ Use the Fully Integrated Grille brackets for a fully integrated
grille installation with a full height grille.
■ Use the standard grille brackets for a Standard Integrated
Grille installation, as shown.
A. Top grille brackets
B. White, grille trim piece
(taped to refrigerator door)
2. Using round-head screws (provided with refrigerator), attach
the grille trim piece to the bottom of the grill panel.
NOTE: The grille trim piece in the stainless steel panel kits is
preinstalled on the grille.
B
A
B
Remove Trim Pieces
1. Remove all tape and door bracing from the refrigerator and
freezer doors.
2. Open the refrigerator and freezer doors.
3. Remove the hinge cover pieces from the top and bottom of the
door to expose the holes in the hinges.
NOTES:
■ It is not necessary to remove the hinge side trims as they
will not interfere with the installation.
■ Leave the freezer drawer trims in place for installation.
A. Hinge cover pieces
B. Door adjustment pin cover
Install Drawer Panel
1. Align the slots in the door panel brackets, located on each side
of the drawer panel, with the holes that go through the drawer
trim and into the drawer.
2. Using Phillips-head flat screws (provided with refrigerator),
attach the brackets to the drawer.
3. Move the drawer panel up and down or from side to side to
align. Do not fully tighten the screws.
A
B
A. Drawer overlay panel
B. Drawer panel bracket
A
B
A
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jb36nxfxleJb36nxfxreJf42nxfxde

Table of Contents