Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nakayama SM9700
Summary of Contents for Nakayama SM9700
- Page 1 SM9700 Please read the manual before use this machine!
- Page 3 Step2 Step1 Step3 Step4 Step5...
- Page 4 Step6 Step7 0.7-0.8mm...
-
Page 5: Safety Instructions
Safety instructions Do not start the engine if anyone is standing in front of the cutter bar – the cutter and wheel drives must not be engaged. General comments Use the mower on grassy areas only. Read operating instructions carefully. Familiarise yourself with the correct operation of The cutter drive must be disengaged when the the mower. - Page 6 For reasons of safety, replace a damaged petrol Spare parts and accessories tank and/or tank cap. Use genuine spare parts and accessories only. We reserve the right to make changes to the design and construction without prior notice. Risk of burns! Non-permitted users: The exhaust as well as the areas around the Persons who are not familiar with the operating...
-
Page 7: Operation
Assembly a).Adjusting the forward and reverse clutch line to Step1.Install the tyre(Fig.C1) adjust the belt tension or loosen. -Mount the tyre1 to the shaft2 (Fig.D1) -Use the lockpin to connect the holes of -If forward belt is not proper,please adjust the”F” tyre and shaft,lock it. -
Page 8: Switching Off The Engine
b).Gear box oil(Fig.E2). Backward the machine -Gear oil has been filled at the works. -pull bakc the PTO lever. -if you want to drain out all the oil,screw out -engage the reverse clutch lever,the machine the nut1,the oil will drain out automatically. will be backward and the cutting bar is not working -Screw out the oil cap2,if the level is low, Switching off the engine... -
Page 9: Air Filter
Air filter Clean it every 3 months or after every 50 hours of use, and replace it if necessary. 1. Unscrew the filter box knobs 2. Remove the cover. 3. Remove the filter. 4. Knock it gently on a flat surface. 5. -
Page 10: Troubleshooting
Troubleshooting Before carrying out any maintenance or cleaning work, pull off the spark plug connector! Fault Remedial action Engine does not start If the engine is cold: press the primer l l u t i s t l i f Engine power reduced Resharpen / replace the blades →... -
Page 11: Specification
Specification ca.146cm x 97cm x 113cm ca. 85kg 97cm 3600 6.5HP 5.00 - 6 ca. 2.1km/h 104 dB(A) 5.5m/s² F7TC,F7RTC...