Installation - JRC JSS-2150 Installation Manual
150w mf/hf radio equipment
Hide thumbs
Also See for JSS-2150:
- Instruction manual (248 pages) ,
- Brochure (6 pages) ,
- Instruction manual (164 pages)
Table of Contents
Advertisement
INSTALLATIONS
2.2.1.2 Installation
(1)
Bottom part and upper part (wiring)
The MF/HF transceiver has a bottom part and an upper part, refer to the following procedure to install
them. Refer to the information on wiring the electric cables and signal lines described later also.
Note 1: Install the upper part after wiring the power cables and signal lines.
Note 2: Refer to the following pages for information on installing the extension board
(CQD-2416) in the bottom part.
1. Loosen the 6 screws (M4), and remove the cover.
Cover
Screw
2. Rotate the top plate in the direction of the arrow and remove it.
Top plate
2-6
Hide quick links:
Advertisement
Table of Contents
