Carrier FDT21 Operation & Installation Manual page 8

HOW TO USE THE REMOTE CONTROL
7 Day program
The system can be programmed to turn on/off on 5 , 2 or 7 day basis.
Move cursor to 7 DAY position and then press MENU button.
Use or
5 day setting (Mon - Fri)
(Timer on setting): Press
Use or
Press MENU button to confirm setting.
(Timer off setting): Repeat step the same as timer on setting.(Press
Press button to exit 7 day program. The LCD "7 day" will show on display.
To cancel 7 Day program:
Press MENU button.
Move cursor to 7 day position and then press MENU button.
Press MENU button again to enter into "Timer On" setting.
Press button 2-3 times to exit 7 day mode. The LCD "7 day" will disappear.
Note : -If 7 Day program's Timer on/off is set, the LCD show "7 DAY".
-To override press
-To deactivate the override press
(For 4 Zone Control Only)
button to select 5, 2 or 7 day setting and then press MENU button.
7 day setting (Mon - Sun)
or button for Hour setting. (Press
button to enter into Minute setting and press
button and hold for 5 seconds. The LCD shows "7 DAY" in blinking.
button and hold for 5 seconds again.
2 day setting (Sat - Sun)
or
8
OPERATION INSTRUCTIONS
button to skip Timer On Setting)
button setting.
button to skip Timer Off Setting)