Carrier FDT21 Operation & Installation Manual page 7

HOW TO USE THE REMOTE CONTROL
2). ENHANCED FEATURES :
The enhanced features that the user has to go into menu window. Press MENU button to display the menu.
NOTE : To exit is to press
ON
CLOCK SETTING
To set the clock is by
Move cursor to
Press or
Use or
Use button to enter into Day setting and then press
Press MENU button to confirm.
Press button to exit.
NOTE : If Timer on/off is set, there will be no Clock display.
TIMER ON
Move cursor to ON
Press or
Use or button to enter into Minute setting and then press
Press MENU button to confirm.
Press button to exit.
NOTE : To cancel is by pressing POWER button while in this setting mode.
TIMER OFF
Move cursor to
Press or
Use or button to enter into Minute setting and then press
Press MENU button to confirm.
Press button to exit.
NOTE : To cancel is by press POWER button while in this setting mode.
ZONE CONTROL
To turn on/off the zone dampers is to
Move cursor to zone position and then press MENU button.
Press A or B button (in case of 2 zone control) or A or B or C or D button (in case of 4 zone control)
to turn on/off any particular zone(S),Display shows the active zone(S).
Press MENU button to confirm.
Press button to exit.
NOTE : By pressing & holding MENU button for 2 second the system will enter to ZONE mode immediately.
ZONE 7 DAY
OFF
position and then press MENU button.
button for Hour setting.
button to enter into Minute setting and then press
position and then press MENU button.
button for Hour setting.
OFF position and then press MENU button.
button for Hour setting.
or
7
OPERATION INSTRUCTIONS
or button for setting.
button for setting.
or button for setting.
or button for setting.