Product Specification; Scope; Optical Characteristics; General Display Parameters - Acer S230HL Service Manual

Hide thumbs Also See for S230HL:

Table of Contents

ACER S230HL

Go to contents page

This document defines the design and

element shall be a 23" inch diagonal, Full HD (1920 x 1080) resolution TFT-LCD display (Thin Film Transistor

Liquid Crystal Display) and support 60Hz.Video input signals are one Analog D-sub and one DVI with non-

interlaced signal. Power saving function

1.2 General Requirements:

1.2.1 Test Condition:

Normal test condition is that brightness level set at Max. and contrast level set default. Test pattern is full

white pattern. The warm up time is more than 30 minutes. Ambient light should be less than 1 Lux.

1.2.2 Test Equipment:

The reference signal source is a calibrated Chroma 2326 or Quantum 801GD video generator. The use of

compatible generators during qualification and production is acceptable. Luminance meter is Minolta CA210,

TOPCON BM7 or compatible equipment.

1. Product Specification

performance requirements for the 23" wide flat panel monitor. The display

complies with the VESA DPMS (Display Power Management Standard).

Table of Contents

Show Quick Links

Table of Contents