Table of Contents
Advertisement
4. Assembly and Disassembly Procedure
ACER S230HL
30
Go to contents page
4.2 Assembly Procedures（A+D monitor）:
1.
Connecting LVDS cable to J3 connector of Main board.
S1
J3
1
S2
1:
Putting the Panel on the protective cushion and let the glass side of panel face us. Then cover it with
Front Bezel
2:
Turning over the panel.Put the main board on it and plug LVDS cable to CN1 connector of source
board (T-con).
1
2
S3
Using Acetate cloth tape to stick LVDS cable on the Panel firmly. (ACETATE CLOTH TAPE size= 60*80mm)
Hide quick links:
Advertisement
Table of Contents
