Operation - Dimplex GDDE-EVDRI16E Instruction Manual

Operation

1. Plug the unit into a correct mains socket. (Please refer to the rating label at the
rear of the unit for correct voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work.
3. Press humidity setting button to set the working mode you require:
continuous working, humidity 40%, 50%, 60% or 70%.
• Press speed/ventilation button to set the ventilation speed, high or low. The relative
indicator light will be on to indicate the setting currently selected.
• Press the TIMER button to set the operating time you require (1~24 hours). The
display window will show the time in hours you set as you press the TIMER button,
the display window will return to show room humidity after around 8 seconds. When
the set time has been reached, the compressor will stop working automatically.
• Pre-setting function: By pressing the TIMER button without turning on the other
functions (including ON/OFF button), you can PRE-SET the time for the product
to switch on later. For example, if you press the timer to '2', the unit will switch on
automatically after 2 hours.
• By pressing the "TEMP" button, the display window will show the room temperature,
after releasing the button the display window will return to show the room humidity
after around 8 seconds.
• DRYER function uses turbo ventilation to dry the moisture in the air continuously,
it can help to dry laundry by removing more moisture from the air.
• If you don't want to dry the air and just want to circulate the air or to help remove
an odour from a room, please press AIR CLEAN button which will disengage the
dehumidifier function and operate the product as an air circulating filter only.
(Selected models only)
• To turn off the unit, press ON/OFF button again.
9