To Export Event Video - Speco DVR-16TS Series Owner's Manual

• Press COPY again on the point that you want to set the end point of the
export. Now, the "ezBurn" window displays as shown below. The
information shown on the window is for read only.
• Press ENTER to start the export; or, press ESC to abort
• If there is not any exportable external device connected to the DVR unit,
then a warning message will be shown on the screen, as illustrated below:
4.4.2.3

To Export Event Video

To export event video, follow these steps:
• Press SEARCH and play desired event video. To play event video, refer to
Section 4.3 Searching Recorded Video.
• After entering the playback mode, press COPY. The "ezBurn" window
displays as shown below . The information displayed is for "read only.".
205/11/07
• If there is not any exportable external device connected to the DVR unit, a
warning message will be shown on the screen
42
ezBurn confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Real Export Range:
From: 2005/11/07 AM10:41:13
To: 2005/11/07 AM10:41:21
Enter: YES
No exportable device detected.
Please install the target device/media
Enter: Retry
ezBurn confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Export Event Info:
Data Time
AM10:42:35
Enter: YES
ESC: NO
to the DVR.
ESC: Exit
Ch
13
ESC: NO
User's Manual
Type
Motion
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06