Table of Contents
Advertisement
q
Voice
w
Mono/Poly
Octave
EQ
Pan
Volume
e
Insertion Effect
r
Effect Depth (Ins/
Cho/Rev)
To store the Voice Part Setup:
If you want to store the settings on the Voice Part Setup display, use the Registration Memory. Press the [MEMORY]
button in the REGISTRATION MEMORY section, then checkmark "Voice" and press one of the REGISTRATION
MEMORY [1]–[8] buttons to register the Voice settings.
Indicates the current Voice and the on/off status of the part. Touching the Voice name calls up the
Voice Selection display for the corresponding part. Touching the Part icon turns the part on/off.
When an Organ Flutes Voice is selected, you can call up the Voice Edit display
part by touching
(Organ Flutes) shown here.
When a Super Articulation (S.Art) Voice is selected, the following icons appear, indicating when
the effects are available and how to use them.
: Move the joystick upward.
: Move the joystick horizontally to bend the pitch. When the multiple keys are pressed, only
one note's pitch bends.
: Press any key repeatedly to switch among the sounds (waveforms).
: Play keys in legato fashion.
: While holding down one key, press another key and release it to play trills.
: Press the key strongly.
: Press the key strongly while moving the joystick upward.
: Press the foot pedal connected to the FOOT PEDAL [2] jack (*).
: Press the key strongly while holding down the foot pedal connected to the FOOT PEDAL [2]
jack (*).
* The icon is as this because the foot pedal connected to the FOOT PEDAL [2] jack is assigned to "Articulation1" func-
tion by default. Using the ASSIGNABLE buttons or [ROTARY SP/ASSIGNABLE] button that the same function is
assigned will have the same effect.
Determines whether the Voice is played monophonically or polyphonically.
Determines the range of the pitch change in octaves, over two octaves up or down for each key-
board part.
Indicates the EQ settings adjusted in the Mixer display
Mixer display.
Adjusts the stereo position (pan), or volume for each part. The settings here are equivalent to those
in the Mixer display
(page
107).
Indicates the current Insertion Effect type for the part and the on/off status of the effect. Touching
"On" or "Off" turns the Insertion Effects on or off. Touching another area here calls up the Insertion
Effect setting display
(page
106) for the corresponding part.
Indicates the depth of the Insertion Effect, Chorus, and Reverb for the part which can be adjusted in
the Mixer display (pages 105, 107). Touching here calls up the Effect page of the Mixer display.
(page
(page
103). Touching here calls up the
PSR-SX900/SX700 Reference Manual
50) for the
2
33
Advertisement
Chapters
Table of Contents
