Table of Contents
Advertisement
Quick Installation Guide
QUICK INSTALLATION GUIDE
Congratulations on your purchase of SY-5STM Mainboard. You are
about to install and connect your new mainboard.
Note: Do not unpack the mainboard from its protective
anti-static packaging until you have made the following
preparations.
PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1.
Pentium processor with CPU cooling fan.
2.
DIMM memory module
3.
Computer case and chassis with adequate power supply unit
4.
Monitor
5.
Keyboard
6.
Pointing Device (PS/2 mouse)
7.
Speaker(s) (optional)
8.
Disk Drives: HDD, CD-ROM, Floppy drive ...
9.
External Peripherals: Printer, Plotter, and Modem (optional)
10.
Internal Peripherals: Modem and LAN cards (optional)
Frequently Asked Questions:
l
Do I need to install a VGA card?
l
Do I also need to install a sound card?
The answer is NO to both questions above, since, for your
convenience, the SY-5STM mainboard already features one built-in
VGA port and three built-in audio-stereo ports (Line-in, Line-out,
Microphone).
Notice: If you plan on using the onboard VGA and intend to install
only one DRAM memory module, then this single DRAM must be
installed in bank DIMM1.
What kind of speaker can connect to "Line-out" port?
l
This motherboard requires a speaker with built-in amplifier to
generate proper output sound volume.
5
SY-5STM
Advertisement
Table of Contents
