Multi I/O Addresses; Making Connections - SOYO Mainboard SY-5S User Manual

Hardware Setup

2-9 MULTI I/O ADDRESSES

Default settings for multi-I/O addresses are as follows:
Port
LPT1
COM1
COM2
Warning: If a default I/O address conflicts with other I/O
cards such as sound card, you must change one of the I/O
addresses to remedy to this address conflict. (I/O addresses
can be adjusted from the BIOS Setup Utility)

2-10 MAKING CONNECTIONS

For making case connections, attach the mainboard to case devices
by plugging flat cables and device cables to the connectors on the
mainboard.
Connect the mainboard to external peripheral devices such as PS/2
keyboard, parallel printer, PS/2 mouse ... via the back panel
connectors.
(Refer to the "Quick Installation Guide" for directions on how to
make connections to the mainboard.)
I/O Address
378H
3F8H
2F8H
37
IRQ
7 ECP + EPP
4
3
SY-5STM
Status