HP EliteOne G5 Maintenance & Service Manual page 84

Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option
Port Options
76 Chapter 5 Computer Setup (F10) Utility
Heading
Select to show the device in the operating system. Default is Enabled.
Wake On LAN
Lets you either disable the Wake On LAN feature, or configure where the computer boots, including the
network or hard drive. Default is Boot to Network.
Video memory size
Use this option to manage graphics memory allocation. The value you choose is allocated permanently to
graphics and is unavailable to the operating system.
Integrated Camera
Clear to disable the integrated camera. Default is Enabled.
Touch Device
Select to show the touch device in the operating system. Default is Enabled.
Audio Device
Select to show the device in the operating system. Default is Enabled.
Microphone
Clear to disable the microphone. This does not affect devices plugged into audio jacks. Default is Enabled.
Internal Speakers (does not affect external speakers)
Clear to disable the chassis speaker or speakers. This function is applicable to normal audio playback in
the operating system and does not affect the error or warning beeps during POST. Default is Enabled.
Headphone Output
Clear to disable the headphone jack. Default is Enabled.
Increase Idle Fan Speed(%)
Sets idle fan speed percentage. This setting only changes the minimum fan speed. The fan is still
automatically controlled.
M.2 USB/Bluetooth
Select to enable the M.2 controller. Default is Enabled.
LAN/WLAN auto switching
Select to enable auto switching between a wired and wireless connection. Default is Disabled.
Wake on WLAN
Select to enable wake on WLAN. Default is Disabled.
Rear USB ports
Lets you disable the ports. Default is Enabled.
Bottom USB ports
Lets you disable the ports. Default is Enabled.
USB Legacy Port Charging
Lets you enable USB charging port capability when the computer is in hibernate or shutdown mode.
Default is Enabled.
USB Type-C Downstream Charging
Lets you enable USB charging port capability when the computer is in hibernate or shutdown mode.
Default is Enabled.