Spare parts
10.4 Anti-condensation heating
NOTICE
Insulated roller bearings
If insulated roller bearings are installed, use insulated roller bearings of the same type as
spare part. This will prevent any bearing damage being caused by bearing currents.
10.4
Anti-condensation heating
The anti-condensation heater is mounted directly on the winding. The anti-condensation heater
cannot be removed without causing damage to the winding. A new anti-condensation heater
may only be installed by Siemens Service Center (Page 129) specialists.
114
SIMOTICS TN Series N-compact 1LH8
Operating Instructions 06/2017