Electric Sunroof - Alfa Romeo STELVIO 949 Owner's Handbook Manual

Table of Contents

Advertisement

ELECTRIC SUNROOF

(where provided)
21)
The electric sunroof comprises two glass
panels (the front one is mobile and the
rear one fixed) and is fitted with an
electrically operated sun blind.
Operation of the sunroof is only possible
with the ignition device at AVV.
OPENING
Press button 1 fig. 35 near the
symbol: to open the roof completely.
11)
The automatic motion can be interrupted
in any position by pressing button
1 again.
35
CLOSING
From the position of complete opening
press button 1 next to the
the roof will close completely.
The automatic motion can be interrupted
in any position by pressing button
1 again.
SWIVEL OPENING
To bring the roof into swivel position,
press and release the specific button 2
fig. 35.
This type of swivel opening can be
activated irrespective of the position of
the sun roof. When starting with the roof
in closed position, pressing the button
automatically causes its swivel-opening.
If the roof is already open, the button
must be held until the roof reaches the
swivel-opening position.
Pressing button 2 again during automatic
movement of the roof will stop it.
BLIND MOVEMENT
The sun blinds are electrically operated.
Press button 3 fig. 35
open the sun blinds.
Press button 3
sun blinds.
04186S0001EM
The automatic motion can be interrupted
in any position by pressing button
3 again.
ANTI-PINCH DEVICE
The sun roof has an anti-pinch safety
symbol:
system capable of detecting the
presence of an obstacle during the
closing movement: if this happens, the
system intervenes and the movement of
the roof is immediately reversed into
opening.
INITIALISATION PROCEDURE
Automatic operation of the sunroof must
be initialised again in case of faulty
sunroof operation.
Proceed as follows:
press button 1 next to the
to bring the roof into completely closed
position;
bring the ignition device to STOP and
wait at least 10 seconds;
set the ignition device to AVV;
hold button 1 down for at least
10 seconds, then you should hear the
mechanical stop of the roof motor;
within 5 seconds hold button 1 down:
the roof will perform a complete
automatic opening and closing cycle (to
symbol: to
indicate that the initialisation procedure
has been successful). If this does not
symbol: to close the
occur, the procedure must be restarted
from the beginning.
Alfawiki.nl
symbol
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stelvio

Table of Contents