Transformer Replacement - Henny Penny HHC-980 Technical Manual

3-7. TRANSFORMER
REPLACEMENT
Figure 3-16
Figure 3-17
3-8
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
1. Using a Phillip's head screwdriver, remove the four screws
securing the front panel.
2. Pull panel down, pull connectors from the back of it, and
remove panel from unit.
3. Label wires to transformer and unplug wires to trans-
former. Figure 3-16.
4. Using a Phillip's head screwdriver, remove the 2 screws
securing the transformer and pull transformer from unit.
Figure 3-17.
5. Install new transformer in reverse order and unit is now
ready for use.
Model HHC-980/983
904