Hitachi SJ Series Safety Function Manual page 24

Chapter 4
■
Parameter setting related function of P1-FS
On the parameter editing screen, when uploading of data
is successful, identification information is displayed.
By changing the setting value column and downloading,
the internal parameters of P1-FS are updated.
■Operation on parameter editing screen
By clicking the related button on the parameter editing
screen, following operations are available.
Function Outline
Parameter editing Edit parameters
Transfer the parameters to P1-
Download
FS
Upload Acquire parameters from P1-FS
Save file Save the data in text file
Read file Read the data from text file
Change the password of the P1-
Change password
FS
The cell where the uploaded information has been
changed from the initial value is light blue, and the line
changed from the current value by the operation of the
cell is displayed in red.
■Password change on P1-FS
By clicking change password on the parameter editing
screen, the password on P1-FS can be changed.
*) The factory password set on P1-FS is [password]. When
the password is [password], P1-FS outputs the STO state
and cannot drive the motor. In this case, the LED on P1-FS
flashes at approximately 2 second cycle.
4-10
Safety Function