Main unit
4
PCB Unit LED lamp FL removal
1. Disconnect the bands on the back of the arm bed (3 locations).
2. Remove the screw 1, and remove the PCB unit LED lamp FL 1.
5
Base plate sub assy. removal
1. Remove the 3 screws 1, and remove the base plate sub assy. 1.
6
Knee lifter assembly removal
1. Remove the 5 screws 1, and then the knee lifter assembly 1.
7
Base plate cover and inlet assembly removal
1. Remove the 2 screws 1, and then remove the base plate cover 1.
2. Remove the screw 2, and then remove the inlet assembly 2.
Electrical parts and motors
1
1
1
1
1
1
1
1
1
2
2
2 - 13