Main unit
13
Front cover disassembly (SS-VR PCB assembly removal)
1. Remove the screw 1, and then remove the lamp holder supporter 1.
2. Remove the 4 screws 2, and then remove the insulation sheet 2 and the
SS-VR PCB assembly 3.
3. Remove the connector of the PCB unit LED lamp (FR).
4. Remove the reverse button 4, SS button 5, and thread cut button 6.
14
Front cover disassembly (SV keytop removal)
1. Remove the SV keytop 1.
*Key point
• Insert a standard screwdriver between 1 and 2, and push
the SV keytop 1 out on the front side.
2. Remove the SV joint plate 2.
2 - 8
Main parts
2
3
2
1
4
6
5
1
1
2
1