Baby Lock BLMY Service Manual page 24

Main unit
7
Front cover removal
1. Remove the screw 1 and the 3 screws 2.
2. Remove the hook 1 on the front cover, and then remove the hook 2 by
pushing the hook attachment section 2 on the rear cover.
*Key point
• Be careful not to damage the hooks 1 and 2 on the front
cover.
3. Remove the 2 bottom hooks 3 from the base plate while sliding the front
cover to the right.
4. Remove the FFC 4 from the main PCB assembly, and then remove the
front cover.
Main parts
1
2
1 2
3
4
2 - 5