Jeep Grand Cherokee 2013 Operating Information Manual page 79

Hide thumbs Also See for Grand Cherokee 2013:
Table of Contents

Advertisement

• For identification purposes, you will be
prompted to give the Uconnect® Phone a
name for your mobile phone. Each mobile
phone that is paired should be given a unique
phone name.
• You will then be asked to give your mobile
phone a priority level between 1 and 7, with 1
being the highest priority. You can pair up to
seven mobile phones to your Uconnect®
Phone. However, at any given time, only one
mobile phone can be in use, connected to
your Uconnect® System. The priority allows
the Uconnect® Phone to know which mobile
phone to use if multiple mobile phones are in
the vehicle at the same time. For example, if
priority 3 and priority 5 phones are present in
the vehicle, the Uconnect® Phone will use
the priority 3 mobile phone when you make a
call. You can select to use a lower priority
mobile phone at any time (refer to "Advanced
Phone Connectivity").
Dial By Saying A Number
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Dial."
• The system will prompt you to say the num-
ber you want to call.
• For example, you can say "151-1234-5555."
• The Uconnect® Phone will confirm the phone
number and then dial. The number will ap-
pear in the display of certain radios.
Call By Saying A Name
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Call."
• The system will prompt you to say the name
of the person you want to call.
• After the "Ready" prompt and the following
beep, say the name of the person you want to
call. For example, you can say "John Doe",
where John Doe is a previously stored name
entry in the Uconnect® Phonebook or down-
loaded phonebook. To learn how to store a
name in the phonebook , refer to "Add Names
to Your Uconnect® Phonebook".
• The Uconnect® Phone will confirm the name
and then dial the corresponding phone num-
ber, which may appear in the display of
certain radios.
Phonebook Download — Automatic
Phonebook Transfer From Mobile Phone
If equipped and specifically supported by your
phone, Uconnect® Phone automatically down-
loads names (text names) and number entries
from your mobile phone's phonebook. Specific
Bluetooth® Phones with Phone Book Access
Profile may support this feature. See Uconnect®
website for supported phones.
• To call a name from downloaded (or
Uconnect®) Phonebook, follow the procedure
in "Call by Saying a Name" section.
• Automatic download and update, if supported,
begins as soon as the phone Bluetooth® wire-
less connection is made to the Uconnect®
Phone. For example, after you start the
vehicle.
• Maximum of 1000 entries per phone will be
downloaded and updated every time a phone
is connected to the Uconnect® Phone.
• Depending on the maximum number of en-
tries downloaded, there may be a short delay
before the latest downloaded names can be
used. Until then, if available, the previously
downloaded phonebook is available for use.
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents