Jeep Grand Cherokee 2013 Operating Information Manual page 78

Operation
Voice commands can be used to operate the
Uconnect® Phone and to navigate through the
Uconnect® Phone menu structure. Voice com-
mands are required after most Uconnect®
Phone prompts. You will be prompted for a
specific command and then guided through the
available options.
• Prior to giving a voice command, one must
wait for the beep, which follows the "Ready"
prompt or another prompt.
• For certain operations, compound com-
mands can be used. For example, instead of
saying "Setup" and then "Pair a Device", the
following compound command can be said:
"Pair a Bluetooth® Device".
• For each feature explanation in this section,
only the compound form of the voice command
is given. You can also break the commands
into parts and say each part of the command
when you are asked for it. For example, you
can use the compound form voice command
"Phonebook New Entry", or you can break the
compound form command into two voice com-
mands: "Phonebook" and "New Entry". Please
74
remember, the Uconnect® Phone works best
when you talk in a normal conversational tone,
as if speaking to someone sitting a few feet/
meters away from you.
Voice Command Tree
Refer to "Voice Tree" in this section.
Help Command
If you need assistance at any prompt, or if you
want to know your options at any prompt, say
"Help" following the beep. The Uconnect®
Phone will play all the options at any prompt if
you ask for help.
To activate the Uconnect® Phone from idle,
simply press the button and follow the au-
dible prompts for directions. All Uconnect®
Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
"Cancel" and you will be returned to the main
menu. However, in a few instances the system
will take you back to the previous menu.
Pair (Link) Uconnect® Phone To A Mobile
Phone
To begin using your Uconnect® Phone, you
must pair your compatible Bluetooth® enabled
mobile phone (refer to "Compatible Phones"
section to learn about the phone type).
To complete the pairing process, you will need to
reference your mobile phone owner's manual.
The Uconnect® website may also provide de-
tailed instructions for pairing.
The following are general phone to Uconnect®
Phone pairing instructions:
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing".
• When prompted, after the beep, say "Pair a
Phone" and follow the audible prompts.
• You will be asked to say a four-digit Personal
Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can enter any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.