Cleaning Your Stairs; Using Cleanshot - Bissell JETSCRUB PET 2526 Series User Manual

Cleaning Your Stairs

Go to support.BISSELL.com for additional how-to videos.
1.
Ensure you are using the
Carpet Nozzle and Brush Roll
for carpeted stairs and the
Hard Floor Nozzle and Brush
Roll for hard floor stairs.
4.
Turn the machine ON and
OFF by pressing Deep Clean or
Express Clean.

Using CleanShot

Go to support.BISSELL.com for a full list of how-to videos.
1.
Press and hold the
CleanShot button located on
the Upper Handle.
WARNING
When cleaning a hard surface, the Hard Floor Nozzle and Microfiber Brush Roll must be used and is only to be used with
BISSELL® Multi-Surface Floor Cleaning Formula intended for use with this appliance. Visit BISSELL.com to purchase.
8 BISSELL.com
2.
Plug machine into a
properly grounded outlet.
5.
Hold machine by placing
one hand on the Carry Handle
under the Dirty Water Tank
and one on the Upper Handle
of the machine.
2.
Maneuver your machine
to completely cover the stain
with CleanShot spray. Release
the button when the stain
is completely soaked with
solution.
To reduce the risk of fire and electric shock:
3.
Press button to retract
handle.
6.
While holding the Spray
Trigger, make 1 pass forward.
Release the Spray Trigger and
make 1 pass back.
3.
Maneuver the foot over the
stain to extract.