Filling The Clean Water Tank - Bissell JETSCRUB PET 2526 Series User Manual

Filling the Clean Water Tank

Go to support.BISSELL.com for additional how-to videos.
Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not
use boiling water. Do not heat water or tank in microwave.
1.
The Clean Water Tank is on
the back of the machine.
4.
Fill the Clean Water Tank with water and formula.
Cleaning Formula
Fill with hot tap water to the Water
Fill Line above Carpet Cleaning.
Add formula to the Formula Fill Line
above Carpet Cleaning. If you're using
a Boost formula additive, add one
ounce to your tank.
5.
Screw the cap back onto
the Clean Water Tank.
6 BISSELL.com
2.
Lift the tank straight up to
remove from the machine.
Antibacterial Formula with EasyFill System™
Fill with hot tap water to the Water Fill Line above the
EasyFill line. Twist the yellow cap back onto the tank.
Firmly insert the formula bottle into the cap on the tank
and squeeze until formula reaches the Formula line and
skip to step 6.
NOTICE: BISSELL Antibacterial formula is only for
BISSELL machines with EasyFill System™.
6.
Align tank with grooves on
back of the machine. Slide tank
down until you hear a "click".
3.
Unscrew the cap from the
Clean Water Tank.