Using The Storage Tray; Storing Your Machine; Warranty - Bissell JETSCRUB PET 2526 Series User Manual

Using the Storage Tray (select models)
Go to support.BISSELL.com for feature videos of your machine.
1.
Grasp Brush Roll Nozzle at
the front of the nozzle and pull
upward to remove.
4.
Replace Brush Roll by
inserting the Brush Roll end
into the right side of the foot.
Then lock the pull tab into
place by pressing downward.

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.
Store your machine in a protected, dry area. When finished using the product, wrap cord around cord
wrap for storage.
NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to
internal components may result.

Warranty

5-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-844-383-2630
for complete warranty information.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2.
Pull Brush Roll out by
grabbing the Brush Roll tab
and pulling upward.
5.
Replace the Brush Roll
Nozzle by first lining up the
Brush Roll Nozzle tabs with the
edges of the foot. Then press
the window back into place
until you hear a "click".
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Place the Brush Roll upright
in the Brush Roll Drying Tray
to dry.
BISSELL.com 11