Chamber - Bissell JETSCRUB PET 2526 Series User Manual

Cleaning & Replacing the Brush Roll and Chamber
Go to support.BISSELL.com for additional maintenance tips for your machine.
1.
Grasp Brush Roll Nozzle on
both sides and pull upward to
remove.
4.
Let your Brush Roll and
Brush Roll Nozzle dry before
reassembling.
WARNING
electrical outlet before performing maintenance or troubleshooting.
10 BISSELL.com
2.
Pull Brush Roll out by
grabbing the Brush Roll tab
and pulling upward.
5.
Replace Brush Roll by
inserting the Brush Roll end
into the right side of the foot.
Then lock the pull tab into
place by pressing downward.
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
3.
Rinse your brush roll and
brush roll nozzle with warm
water. The nozzle Clean Out
tool can be used to remove
hair and debris. Note: These
parts are not dishwasher or
automatic washing machine
safe.
If your Brush Roll chamber is
dirty, clean with a rag or towel.
6.
Replace the Brush Roll
Nozzle by first lining up both
Brush Roll Nozzle tabs with the
edges of the foot. Then press
the nozzle back into place until
you hear a "click".