Accessing The Network Through The Ppp Dial-Up Software On Your Computer - Huawei HG532s Quick Start Manual

7. Select PPP(oE) from the Connection type drop-down combo box.
8. Enter the user name and password that are provided by the network operator in
the User name and Password text boxes, keep the default settings of other
parameters.
9. Click Submit.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time when
you power on your computer, you can surf the Internet without any configuration.
Accessing the Network Through the PPP Dial-up Software
on Your Computer
If you select this method for accessing the network, you need to install and configure the
dial-up software on your computer. In addition, you need to perform dial-up operations on
your computer upon each startup. To configure the HG532s and your computer for the
network access, do as follows:
Step 1 Set the working mode of the HG532s to Bridge.
1. Log in to the Web-based configuration utility of the HG532s.
2. In the navigation tree on the left, choose Basic > WAN.
3. Click the connection whose name is O2 Fixed.
4. Select DSL from the Link Type option button.
5. Select Enable for WAN connection.
6. Enter the VPI and VCI parameters that are provided by the network operator in
the VPI/VCI text boxes.
7. Select INTERNET from the Service list option button.
8. Select Bridge from the Connection type drop-down combo box.
9. Click Submit.
Step 2 Install and configure the PPP dial-up software on your computer.
Step 3 The following example uses a computer running the Windows 7 operating system to
describe how to set up a dial-up connection using the system-provided PPP dial-up
software:
1. Choose Start > Control Panel > Network and Sharing Center.
2. Under Change your network settings, click Set up a new connection or
network.
3. In the Set Up a Connection or Network dialog box, select Connect to the
Internet, and click Next.
4. In the Connect to the Internet dialog box, select Set up a new connection
anyway, and click Next.
5. Select Broadband (PPPoE), and click Next.
6. Under Type the information from your Internet service provider (ISP), enter
the user name and password provided by your operator. In Connection name,
enter a name for your connection, and click Connect.
The system then tries to connect to the Internet.
3