DRIVER SUPPORT
||
ing alone. The driver can temporarily disen-
gage the Cruise Control braking function.
To disengage CC:
Press the accelerator pedal about halfway
–
down and then release it.
> Cruise Control will automatically disen-
gage the automatic brake function and
speed will only be reduced using the
engine braking function.
Related information
Driver support systems (p. 272)
•
Selecting and activating cruise control
•
(p. 280)
Deactivating cruise control (p. 281)
•
Cruise control standby mode (p. 281)
•
Adjusting set speed for driver support
•
(p. 302)
Switching between cruise control and
•
Adaptive Cruise Control* in the center dis-
play (p. 288)
16
Cruise Control
280
Selecting and activating cruise
control
16
The Cruise Control (CC
) function must be
selected and activated in order to regulate
speed.
In order to start Cruise Control from standby
mode, the vehicle's current speed must be
30 km/h (20 mph) or higher.
Press the ◀ (1) or ▶ (3) button on the
1.
steering wheel keypad and scroll to the
cruise control symbol
> Gray symbol – cruise control is in
standby mode.
2. When cruise control is selected, press
(2) on the steering wheel keypad to acti-
vate.
> White symbol – cruise control starts
and the current speed is stored as the
maximum speed. The lowest speed
that can be set is 30 km/h (20 mph).
Reactivating cruise control to the last
stored speed
When cruise control is selected, press
–
on the steering wheel keypad to activate.
> The Cruise Control marking in the
instrument panel will change from
GRAY to WHITE and the vehicle will
then return to the most recently set
speed.
WARNING
A noticeable increase in speed may follow
when the speed is resumed with the
steering wheel button.
(4).
Related information
Cruise control (p. 279)
•
Deactivating cruise control (p. 281)
•
Cruise control standby mode (p. 281)
•
* Option/accessory.