Table of Contents
Advertisement
The function is only active in weak daylight or
dark conditions and only when the vehicle is
moving and the low beams are on.
Deactivating/activating the function
The function is activated as the default factory
setting and can be activated and deactivated
in the center display's Function view:
Tap the
Active Bending
Lights
button.
Related information
Adjusting light functions via the center
•
display (p. 157)
Rear fog light
The rear fog light is considerably brighter
than ordinary taillights and should only be
used to help other road users see the vehicle
when visibility is reduced by conditions such
as fog, snow, smoke or dust.
Rear fog light button.
The rear fog light consists of a light on the rear
of the vehicle on the driver's side.
The rear fog light can only be switched on
when the ignition is in II mode and the lighting
ring is in position
or
Press the button to switch on/off. The
symbol in the instrument panel illuminates
when the rear fog light is on.
The rear fog light turns off automatically when
the ignition is switched off or when the steer-
ing wheel lever lighting ring is in position
or
NOTE
Regulations concerning rear fog light use
vary from country to country.
Related information
Lighting control and panel (p. 156)
•
Ignition modes (p. 405)
•
.
LIGHTING
.
163
Advertisement
Table of Contents
