Table of Contents
Advertisement
LIGHTING
||
Tunnel detection
The vehicle will detect if it enters a tunnel and
shift from daytime running lights to low
beams.
Note that the left-hand steering wheel lever
must be in
position for tunnel detection
to work.
Related information
Lighting control and panel (p. 156)
•
Ignition modes (p. 405)
•
Daytime running lights (p. 158)
•
2
When the low beams are on.
160
Using high beam
High beam is operated via the left-hand
steering wheel lever. High beam is the vehi-
cle's strongest lighting and should be used
when driving in dark conditions, provided it
does not blind other road users, to improve
visibility.
Steering wheel lever with lighting ring.
High beam flash
Move the steering wheel lever slightly
backward to the high beam flash mode.
The high beams will illuminate until the
lever is released.
High beams
The high beams can be activated when
the lighting ring is in mode
. Activate high beams by moving the
steering wheel lever forward.
Deactivate by moving the steering wheel
lever backward.
When the high beams are activated, the
symbol will be illuminated in the instrument
panel.
Related information
Lighting control and panel (p. 156)
•
Active high beam (p. 161)
•
2
or
Advertisement
Table of Contents
