Embroidery preparation
2
2.1 Accessory box
Accessory box free standing
> On the back of the box, pull both extensions out until they click into place.
Storing accessory
NOTICE
Incorrect sorting of the bobbin
The silvery sensor surface can get scratched.
> Make sure that the silvery sensor surfaces are on the right side when sorting the bobbins into the
> Insert the holders (1) for bobbins, feet and needles.
> Store the small parts, e.g. thread discs etc., in the drawers (2) and (3).
> Store the provided needle package in the special compartment (4).
> Insert the bobbins into the compartment (5) of the accessory box so that the silvery sensor surfaces are
> To remove a bobbin, press the compartment holder down.
> Store the embroidery feet (5.5 mm or 9.0 mm) in the holders (6).
30
Embroidery preparation
accessory box.
on the right side.
1
1
1
5
6
4
3
2
1
1