Troubleshooting - Bissell ADAPT ION PET 2286 Series User Manual

Troubleshooting

WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing
maintenance or troubleshooting.
Problem
Vacuum
won't turn
ON
Vacuum
won't turn on
and LED light
is solid RED
Brush Roll
not turning
Vacuum
cleaner
has low
suction
Visible dirt
escaping
from vacuum
Vacuum
won't charge
10
www.BISSELL.com
Possible Causes
Battery isn't fully charged.
Wrong charger is being used.
Brush Roll stalled by debris.
Brush Roll is jammed.
Brush Roll needs to be reset.
Dirt Tank is full.
Dirt Tank isn't installed properly.
Foot is loose.
Filters need cleaning.
Filters need replacing.
Clog or obstruction in foot area.
Dirt Tank is full of debris.
Filter Assembly is missing or
installed incorrectly.
Dirt Tank installed incorrectly.
Wrong charger is being used.
Hand vacuum may not be
installed in place properly.
Remedies
Charge battery. Follow charging
battery instructions on page 5.
Be sure to use only the charger
supplied with your product. The label
on the detachable hand vacuum will
list which charger can be used.
Clear the Brush Roll and brush roll
end cap area. Follow instructions on
page 8.
Remove obstruction. Follow
instructions on page 8.
Follow instructions on page 8.
Empty tank.
Position tank correctly and
snap firmly into place.
Make sure foot is fully inserted into
body of vacuum.
Follow cleaning instructions on
page 7.
Contact BISSELL Consumer Care.
Detach foot from main body and
examine and remove clog from brush
chamber.
Empty tank.
Check filter for correct installation.
Position tank correctly and
snap firmly into place
Use only the charger that comes with
the machine.
Remove the hand vacuum and install
it properly.