Ryobi RBL26G Original Instructions Manual page 21

OPERATION
USING THE BLOWER
1. Align raised tabs on upper blower tube
with the slots on blower housing outlet.
Attach and tighten securely by turning
the tube clockwise until it clicks into
place.
2a. Attach the sweeper nozzle to upper
blower tube. Tighten securely by turning
the nozzle clockwise until it clicks into
place.
2b. Attach the high velocity nozzle to upper
blower tube. Tighten securely by turning
the nozzle clockwise until it clicks into
place.
NOTE: Hold the blower with the upper
handle in your right hand. Hold the
blower as shown so the air stream can
work close to the ground.
1
1
2a
2
1
2b
2
1
2
21